One set is sufficient to cover approximately 10 m² of a wall's surface.

One set includes Decobase paint, Metaliq Paste and Metaliq Top, For Patine effect - also a bag of Metaliq Patine.

The substrate should be clean, degreased, completely smooth, stable and uncracked.

Surfaces that are highly absorbent (e.g. fresh plaster), or those that are not equally absorbent, should first be primed with a suitable primer. We recommend our PRIMACOL® DECORATIVE primer, which is a universal product and will work for most surfaces.

First step: DECOBASE

Paint the surface with Decobase paint. It will create a base coat similar to the effect's colour, reduce the consumption of Metaliq and ensure the best possible final result. When dry, sand the wall gently with fine sandpaper and dust it off.

Second step: METALIQ PASTE

Open the bucket with Metaliq Paste and mix the contents thoroughly, preferably with a mechanical agitator at slow speed or alternatively, by hand. Apply the paste with a Venetian trowel. It is recommended to use tools with perfectly even and sharp edges. Apply Metaliq Paste to the wall in horizontal and vertical movements to form a pattern. Work in stages on an area of max 0.5m² at a time. Repeat this process until the entire surface is covered and leave the wall to dry for about 12h.*

After this time, carefully sand the surface with fine sandpaper(180-200 grit), dust off and polish with a clean spatula guiding the tool vertically and horizontally.

* For Metaliq Patine effect, after the Metaliq Paste has dried, additionally apply a small amount of Metaliq Patine in places with a venetian trowel. Then, as with other colours, after about 12 hours, sand the surface with fine sandpaper, dust off and polish the wall with a clean spatula.

Third step: METALIQ TOP

Open Metaliq Top and mix the contents thoroughly. Apply the product in a thin layer with a spatula, spreading it vertically and horizontally.

After covering the entire surface, let the wall dry completely, at least for 12 hours.

Purchase the Taping Knife and Venetian Trowel for applying Metaliq paint here.
Find PDF Instructions in "More info" below.

Tools: paint roller - buy here, venetian trowel- buy here, spatula - buy here, fine sandpaper
Coverage: ±10 m²/set
No. of layers: 3
Cleaning of tools: Water with detergent
Drying time: 24h

Download:
1. SDS Metaliq Paste, SDS Metaliq TOP, SDS Back Decobase,
2. TDS Metaliq Paste, TDS Metaliq Top, TDS Black Decobase
3. Instruction

Manufacturer:
Unicell International sp. z o.o.
Supraslska 25
16-010 Wasilkow
Poland
tel. +48 667 950 839

E-mail address of the responsible:
shop@primacol.com

Metaliq Kit

Item number: Metaliq paste

Hazards identification:
Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit (cat. A/I/WB) 200 g/l, product contains
< 200 g/l. Do not enter product remains into the sewage system. Dispose of contents/container in a licensed waste disposal facility.
Keep out of reach of children

Item number: Metaliq Top

Hazards identification:
Treated article. Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit (cat. A/I/WB) 200 g/l, product contains max 10 g/l. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Do not enter product remains into the sewage system. Dispose of contents/container in a licensed waste disposal facility. Keep out of reach of
children


Item number: Decobase

Hazards identification:
Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and 2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit (cat. A/a/WB) 30 g/l, product contains < 30 g/l. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Do not enter productremains into the sewage system. Dispose of contents/container in a licensed waste disposal facility. Keep out of reach of children.