One set is sufficient to cover approximately 7m² of a wall's surface.

One set includes Decobase paint and Polaris paint.

The substrate should be clean, degreased, even, stable and uncracked.

Surfaces that are highly absorbent (e.g. fresh plaster), or those that are not equally absorbent, should first be primed with a suitable primer. We recommend our PRIMACOL® DECORATIVE primer, which is a universal product and will work for most surfaces.

First step: DECOBASE

Paint the surface with Decobase paint. It will create a base coat similar to the effect's colour, reduce the consumption of Polaris and ensure the best possible final result. When dry, sand the wall gently with fine sandpaper and dust it off afterwards.

Second step: POLARIS

After opening the Polaris bucket, stir the contents thoroughly. Start applying the product from the top corner of the wall and move diagonally extending the decorated surface. Apply the product with a venetian trowel, spreading it in different directions. Work on small areas at a time using the "wet-on-wet" method. The thickness of the applied layer should not exceed 1 mm.

Before the surface dries completely, smooth it with the edge of a clean venetian trowel in different directions. This will emphasise the Polaris effect, especially the satin reflections.
Repeat the process until the desired decorative effect is achieved and leave the wall for at least 24 hours until completely dry.

If you find it necessary, you can apply a second coat of paint, also starting from the top of the wall, but from the opposite corner.

Find PDF Instructions in "More Info" below.

Tools: paint roller - buy here, venetian trowel - buy here, fine sandpaper
Coverage: ±7 m²/set
No. of layers: 2
Cleaning of tools: water with detergent
Drying time: 24h

Download:
1. SDS Polaris, SDS Decobase
2. TDS Polaris,TDS Decobase
3. Instruction

Manufacturer:
Unicell International sp. z o.o.
Supraslska 25
16-010 Wasilkow
Poland
tel. +48 667 950 839

E-mail address of the responsible:
shop@primacol.com

Polaris Kit

Item number: Polaris

Hazards identification:
Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and
2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit
(cat. A/I/WB) 200 g/l, product contains < 200 g/l. Do not enter product remains into the sewage system. Dispose
of contents/container in a licensed waste disposal facility.Keep out of reach of children.

Item number: Decobase

Hazards identification:
Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit(cat. A/a/WB) 30 g/l, product contains < 30 g/l. Warning! Hazardous respirable droplets may be formed whensprayed. Do not breathe spray or mist. Do not enter product remains into the sewage system. Dispose ofcontents/container in a licensed waste disposal facility. Keep out of reach of children.