Decobase Paint

Decobase – a matte latex paint for indoor walls and ceilings. The paint is especially recommended as a primer before applying Primacol decorative effects such as: Silver Sand, Royal Silk, Mystic, Moonlight, Polaris, Modern Stone and Metaliq. 

Substrate preparation

Paint designed for painting surfaces of mineral and gypsum plasters, plasterboards, bricks and fiberglass wallpaper.
The substrate to be painted should be stable, clean, dry and uniform. Fresh plasters can be painted after a 4 -week seasoning. Any cavities and cracks should be repaired and leveled with filler putty. 

Application

Mix the paint thoroughly before use. For larger areas, use products from the same batch. Otherwise mix the contents from different batches in one container. Paint at the ambient and substrate temperature of 10°-30°C. Apply 1-2 layer(s) at approximately  3-hour intervals.

The ceiling should be painted starting from the side of the window and heading to the center of the room, according to the direction of light. The walls should be painted starting from hard-to-reach places and corners with a brush or a small roller.

Apply a generous amount of paint on the paint roller and distribute it on the substrate carefully and evenly. It is important not to paint with a dry roller. When painting, do not take breaks or make corrections on a semi-dry coat. Paint using the wet-on-wet method. Always finish painting each section of the surface with roller movements in the same direction. Ventilate the room after paining until the odour has gone. Allow the painted surface to dry for about 12 hours.

Technical information

Tools: brush, roller
Dry to touch: 4-8h  
No. of layers: 1/2
Coverage: ± 9m²
Cleaning of tools: water
Thinner: water

Download
1. SDS
2. TDS

Note: The colors presented should be treated as a preview only, as color perception is affected by monitor settings (brightness/contrast/color temperature) and outdoor lighting.