One set is sufficient to cover approximately 10m² of a wall's surface.

One set includes Decobase paint and Silver Sand paint. For colours: Umbra 2, Umbra 40, Turquise 2, Turquise 40, Claret 2, Claret 40, Navy Blue 2, Navy Blue 40, Bottle Green 2, Bottle Green 40, Black 2, Black 40 the set also includes Colorant.

The substrate should be clean, degreased, even, stable and uncracked.

Surfaces that are highly absorbent (e.g. fresh plaster), or those that are not equally absorbent, should first be primed with a suitable primer. We recommend our PRIMACOL® DECORATIVE primer, which is a universal product and will work for most surfaces.

First step: DECOBASE

Paint the surface with Decobase paint and let it dry. Decobase will create a base layer for further work in a colour similar to the effect's colour and ensure the best possible final result.
If necessary, apply 2 coats of Decobase.

Leave the wall to dry
completely (few hours).

Second step: SILVER SAND

After opening the Silver Sand bucket, stir the contents thoroughly. For colours: Umbra 2, Umbra 40, Turquise 2, Turquise 40, Claret 2, Claret 40, Navy Blue 2, Navy Blue 40, Bottle Green 2, Bottle Green 40, Black 2, Black 40 - pour the appropriate amount of colorant into the Silver Sand S0 base and mix thoroughly. Mixing should be repeated during the application, from time to time.

Apply the paint with a flat brush. Work on small areas at a time (approx. 1 m²) using the "wet-on-wet" method.

Depending on the desired effect, painting can be done in various ways.

To achieve the classic Silver Sand effect, proceed as follows.
Start applying the product from the top corner of the wall and move diagonally extending the decorated surface. Make irregular, criss-cross brush strokes, spreading the paint in different directions until the entire wall is covered.

You can also apply the product horizontally or vertically to create, for example, a striped pattern.

Regardless of the chosen method of application do not return to a previously painted area when it has already dried slightly and don’t do spot touch-ups at the end.

After painting the entire wall, leave it for about 24 hours to dry completely.

Purchase a special brush for applying Silver Sand paint here.
Find PDF Instructions in "More Info" below.

Tools: paint roller - buy here, flat brush - buy here
Coverage: ±10 m²/set
No. of layers: 2
Cleaning of tools: water with detergent
Drying time: 24h

Download:
1. SDS Silver Sand, SDS Decobase
2. TDS Silver Sand, TDS Decobase
3. Instruction