Product Details

A Let's Shine egy dekoratív festék, amely beltéri falakra és mennyezetekre készült. A választott színtől függően a Let's Shine finom ezüstös vagy arany csillámporokat tartalmaz, hogy finom csillogó hatást érjen el, amely fokozott megvilágítás alatt intenzívebbé válik. Ez a festék jó moshatósággal és kiváló fedőképességgel rendelkezik, biztosítva a tartósságot és a sima felületet. 30 színben elérhető, a Let's Shine széles választékot kínál, így megtalálhatja a tökéletes árnyalatot, amely kiegészíti az Ön terét.

Tipp: Ha nem csillogó hatású festéket keres, hanem csak egy kiváló minőségű, hagyományos festéket, akkor is választhatja a Let's Shine-t. Egyszerűen hagyja ki a csillám hozzáadását a festékhez, mivel a csillám külön zacskóban van.

1. Coverage

One bucket (2L) will cover approximately 8m² of a wall's surface (2 layers).

2. What's in the box?

A bucket of the Let's Shine paint and a sachet of glitter (under the lid of the bucket).

3. Step-by-step application

The substrate to be painted should be stable, clean, dry and uniform. Any defects and cracks should be repaired and levelled out.

Surfaces that are highly absorbent (e.g. fresh plaster), or those that are not equally absorbent, should first be primed with a suitable primer. We recommend our PRIMACOL® DECORATIVE primer, which is a universal product and will work for most surfaces.

After opening the Let's shine bucket, stir the contents thoroughly. Then, pour glitter into the bucket and carefully but gently mix again, distributing the glitter evenly in the paint. Do not use a mechanical mixer when mixing paint with the glitter - this will damage the glitter particles.

Apply a generous amount of paint on the roller and distribute it carefully and evenly, spreading the paint with vertical (up and down) movements. Use a microfibre medium-pile roller (11-13 mm) to paint large areas. Finish each section of the painted surface by moving the roller always in the same direction. Once the whole surface is finished, leave it to dry for about 4 hours.

After this time, apply a second coat in the same way as the first. Once the painting is complete, let the wall/ceiling dry for about 12 hours.

Find PDF Instructions in "More info" below.

4. More info

Tools: paint roller - buy here
Coverage: ±8 m²/ 2l
No. of layers: 1/2
Cleaning of tools: water
Drying time: 12h

Download:
1. SDS
2. TDS
3. Instruction

5. Safety and manufacturer information

Manufacturer:
Unicell International sp. z o.o.
Supraslska 25
16-010 Wasilkow
Poland
tel. +48 667 950 839

E-mail address of the responsible:
shop@primacol.com

Let's Shine

Item number: Let's shine

Hazards identification:

Contains: C(M)IT/MIT (3:1). Contains reaction mass of 5-chloro-2-methyl-2H-isothiazol-3-one and
2-methyl-2H-isothiazol- 3-one (3:1); 1,2-benzisothiazol-3(2H)-one. May produce an allergic reaction. VOC limit
(cat. A/I/WB) 200 g/l, product contains < 200 g/l. Warning! Hazardous respirable droplets may be formed when
sprayed. Do not breathe spray or mist. Do not enter product remains into the sewage system. Dispose of
contents/container in a licensed waste disposal facility. Keep out of reach of children.