One set is sufficient to cover approximately 12m² of a wall's surface.

One set includes Decobase paint and Moonlight paint.

The substrate should be clean, degreased, even, stable and uncracked.

Surfaces that are highly absorbent (e.g. fresh plaster), or those that are not equally absorbent, should first be primed with a suitable primer. We recommend our PRIMACOL® DECORATIVE primer, which is a universal product and will work for most surfaces.

First step: DECOBASE

Paint the surface with Decobase paint to create a base layer for further work. Moonlight is a semi-transparent product so be sure to cover the wall with Decobase thoroughly. Leave the wall to dry completely.
If necessary, apply two coats of Decobase.

Second step: MOONLIGHT

Before use, mix Moonlight paint thoroughly but gently. Do not use high-speed mixers as this may damage particles contained in the product.
Apply a small amount of the product with a flat brush in a criss-cross movements to an area of about 0.5m² at a time. Then gently spread the particles contained in the paint in different directions, forming irregular clusters, while trying not to leave brush marks. Repeat this process until the entire surface is covered, making sure to connect each area using the "wet-on-wet" method.

The final effect depends mostly on the creativity of the painter. The product can also be applied in vertical or horizontal movements.

Once the entire decorated surface is covered, leave it to dry for at least 24 hours.

Purchase a special brush for applying Moonlight paint here.
Find PDF Instructions in "Technical info & digital materials" below.

Tools: paint roller - buy here , flat brush - buy here
Coverage: ±12 m²/set
No. of layers: 2
Cleaning of tools: water with detergent
Drying time: 24h

Download:
1. SDS
2. TDS
3. Instruction